Why is my socket scanner not working?

Why is my socket scanner not working?

On your scanner, hold down the large scan button and then press the small power button until you hear 3 beeps. Go to iPad > Settings > Bluetooth and make sure Bluetooth is turned ON. On the Bluetooth settings screen, now tap the blue circle on the line that says Socket CHS. Tap Forget this Device.

Does the OBD port have a fuse?

The most common cause of an OBD scanner that won’t turn on is a blown fuse on the vehicle’s OBD socket power supply circuit. If the check engine light fails to aluminate, you can be sure the fuse has blown. Checking the vehicle’s fuse box and replacing the blown fuse fixes the issue.

What to do if scanner is not working?

First check your connection to the scanner and computer: Make sure your scanner’s AC adapter is securely connected to the scanner and a working electrical outlet. Make sure the interface cable is securely connected to the scanner and your computer, and that the cable is not damaged or crimped.

Why is barcode scanner not working?

There are many reasons barcodes might not scan and most of them can be boiled down to one of three things—your equipment isn’t suited to your barcodes, your scanner isn’t being operated properly or your barcode labels aren’t suited to your application or environment.

Why won’t my scanner read my car?

If the reading is much below 11 volts, some scan tools have problems connecting. If this is the case, inspect the battery and or charging system first. If you read no voltage between pins, a blown fuse is most likely the problem. If so, replace the fuse and recheck your power.

How do I get my scanner to work?

Install or add a local scanner

  1. Select Start > Settings > Devices > Printers & scanners or use the following button. Open the Printers & scanners settings.
  2. Select Add a printer or scanner. Wait for it to find nearby scanners, then choose the one you want to use and select Add device.

How do I fix my barcode scanner on my Android?

Force close the app: Try force closing the app by tapping your phone’s “Overview” button (the button which runs across the bottom of your phone’s screen which displays all running apps). Swipe the Merchandiser app to force close it. Restart the app once you have internet connectivity and try the scanner once more.

How do I Reset my Bluetooth socket scanner?

Tap the blue ⓘ next to the Socket scanner. Tap ‘Forget This Device’, then ‘OK’. Power the scanner OFF and then back ON to get the device to reappear in your Bluetooth settings. Tap the ‘Socket’ device in your Bluetooth settings to reconnect the scanner.

How do you remove a broken bulb from a light socket?

A soda bottle can also be used to extract a broken bulb from a light socket. Instructables user prabbit22m suggests removing the cap and seal band from the neck of a soda bottle, leaving just the exposed threads.

Why won’t my scanner connect to my Bluetooth device?

Bluetooth settings can sometimes get disrupted. The scanner powers off and disconnects after 2 hours of no activity by default. Turn off your host device’s Bluetooth then scan the “scanner is always on” barcode below to configure your scanner. The scanner is low on battery, less than 5%.

Why does my scanner keep disconnecting from my Device?

Turn off your host device’s Bluetooth then scan the “scanner is always on” barcode below to configure your scanner. The scanner is low on battery, less than 5%. Ensure the scanner is connected to power. My scanner disconnects frequently, nearly every 10 minutes. Your iPad/tablet’s Auto-lock feature is enabled.