Why is my computer not detecting my hard drive?
If your new hard disk is not detected by or Disk Manager, it could be because of a driver issue, connection issue, or faulty BIOS settings. These can be fixed. Connection issues can be from a faulty USB port or a damaged cable. Incorrect BIOS settings may cause the new hard drive to be disabled.
Why is my hard drive not detected in BIOS?
The BIOS will not detect a hard disk if the data cable is damaged or the connection is incorrect. Serial ATA cables, in particular, can sometimes fall out of their connection. Be sure to check your SATA cables are tightly connected to the SATA port connection.
Why is my motherboard not detecting my SSD?
The BIOS will not detect a SSD if the data cable is damaged or the connection is incorrect. Be sure to check your SATA cables are tightly connected to the SATA port connection. The easiest way to test a cable is to replace it with another cable. If the problem persists, then the cable was not the cause of the problem.
How do I enable hard drive in BIOS?
Restart PC and press F2 to enter BIOS; Enter Setup and check system documentation to see whether the not detected hard drive is turned Off in System Setup or not; If it’s Off, turn it ON in System Setup. Reboot PC to check out and find your hard drive now.
How do I fix an undetectable SSD?
Quick Fix. Unplug and Re-plug SATA Data Cable on SSD
- Unplug SATA data cable on SSD, leave the power cable connected.
- Turn on the PC and boot into BIOS.
- Let PC sit idle in BIOS for about half an hour and turn off PC.
- Plug the SATA data cable back into SSD and turn on PC to boot into BIOS.
How do I get my motherboard to recognize my SSD?
Solution 2: Configure the SSD settings in BIOS
- Restart your computer, and press the F2 key after the first screen.
- Press the Enter key to enter Config.
- Select Serial ATA and press Enter.
- Then you’ll see SATA Controller Mode Option.
- Save your changes and restart your computer to enter BIOS.
What to do if the computer can’t detect the hard disk?
If the computer can’t detect and find hard disk or SSD after the power is turned on, please follow the steps below to troubleshoot: 1. Please try to update the latest version BIOS from ASUS official website. Please refer to this FAQ for more : [Motherboard] ASUS EZ Flash 3 – Introduction 2.
Why is my SATA hard drive not detected by my Motherboard?
Drivers aren’t enabled When installing the OS, sometimes motherboard drivers are not installed immediately; to do this, you need to perform several actions. if you do not do this, then the “ASUS motherboard not detecting SATA hard drive” will continue to appear in the future. More often, this happens with the installation of Windows XP/2000.
Why is my hard drive not showing up in the BIOS?
CHECK BIOS. a. Reboot your PC. When the Windows logo appears, click F2 or DEL a few times to enter BIOS interface. b. Check whether the hard drive is in the list of all connected drives. If it does not appear, it could probably be because the hard drive is not connected properly.
How to fix hard drive not showing up in Windows 10?
[Solution] Hard Drive not Showing Up Fix 1 CHECK IF DISK IS CONNECTED PROPERLY. 2 INITIALIZE DISK. 3 UPDATE DRIVERS. 4 RUN DISKPART COMMAND. 5 CHECK BIOS. See More….