Why is my Camaro check engine light?

Why is my Camaro check engine light?

Other common reasons for a Check Engine Light are faulty emissions control part, damaged oxygen sensor, dirty mass airflow sensor, a malfunction with the fuel injection system, faulty head gasket, or defective spark plugs to name a few.

How do you reset the check engine light on a Camaro?

Steps to Reset Check Engine Light

1. Turn off the ignition and put on safety glasses and gloves.
2. Locate the negative terminal on your car battery.
3. Loosen the nut on the negative terminal with a wrench and pull the negative connector from the battery.
4. Reconnect the negative cable and tighten it with your wrench.

Why is my Camaro misfiring?

A vacuum leak or a faulty fuel pump can also cause this symptom as well. The first thing the mechanic will do is determine which cylinder or cylinders is misfiring, and the spark plug color is probably the best way to tell. If needed, the spark plug can be replaced.

Why is my car shaking and check engine light flashing?

The primary culprit that makes your check engine light blinking and car shaking is a malfunctioning cylinder. When the cylinder does not work as expected or it does not pass the fuel and air every time the crankshaft turns, it misfires. As a result, the engine runs rough and it makes the overall car shaking.

How do you reset the check engine light on a 2017 Camaro?

A few different ways to reset your check engine light are:

1. Let it go off by itself.
2. Turn your ignition on and off several times in a row.
3. Disconnect your battery and reconnect it.
4. Buy an OBD II scanner (they’re relatively inexpensive) and follow the instructions (it’s pretty easy)

How do you reset the oil light on a Camaro?

Turn the key to IGNITION ON (no engine start). Fully press and release the accelerator pedal slowly three times within five seconds. Turn the key to OFF, then start the vehicle. If the light or message comes back on when you start the vehicle, the OIL LIFE SYSTEM has not reset.

How do you reset the oil life on a 2010 Camaro?

1. Turn The Ignition to ON Position. Don’t Start the Engine.
2. Turn The Ignition to ON Position. Don’t Start the Engine.
3. WHILE THE OIL LIFE IS DISPLAYED. PRESS THE SET/CLR BUTTON TO RESET, IF CONFIRMATION MESSAGE APPEAR CHOOSE YES TO RESET THE OIL LIFE TO 100%.

Should I be concerned if my check engine light is on?

When Your Check Engine Light Comes On A blinking “check engine” light, however, is cause for concern and indicates that your vehicle needs immediate attention. It is highly recommended that you bring your vehicle in for further inspection by a trained professional.

What does check engine light mean on a Chevy Camaro?

A check engine light will display on the dashboard of your Chevrolet Camaro when there is a problem. Here’s how to disable it once that problem has been resolved. This article applies to the Chevrolet Camaro (2010-2015).

What are some of the problems with the Chevrolet Camaro?

Also please check out the statistics and reliability analysis of Chevrolet Camaro based on all problems reported for the Camaro. When the car is in motion, it turns on the check engine light and turns off, it tries to turn on and stays on for a while had a turn on. The check engine is not cleared.

What is the warranty on a 2010 Camaro with p0008 error?

Research on stretched timing chain from p0008 error for Camaros indicated many others with issue and extended warranty up to 10 years/120,000 miles issued by gm for other vehicle models using same engine. Bulletin/warranty should be extended to affected 2010 Camaros.

How do I change the battery in my Camaro?

Once your engine is off, go ahead and hop out of your Camaro. Release the latch and pop the hood of your car. Remove the negative battery terminal (black cord) from your car battery and keep it off for approximately two minutes.