What wheel bolt pattern is E46?

What wheel bolt pattern is E46?

Nearly all BMWs have 5 lug bolts in a 120mm bolt circle….BMW Bolt Patterns & Center Bore:

BMW Model Bolt Pattern Center Bore
5-lug E-Chassis (except E39) 5×120 (4.72″) 72.56mm (2.86″)

What is the bolt pattern on a 2003 BMW?

The wheel bolt pattern on the 2003 bmw 325i is 5x120mm.

What wheels are compatible with my car?

The two easiest ways are to check the sticker plate in your car, it should be located inside the driver side door, or look online for the vehicle specifications for your exact make and model. That should tell you the standard rim size.

Will 19 rims fit on a E46?

Regarding the wheels, yes 19s will fit the E46 no problem (arches may need rolling if the car is lowered), but the main thing is the offset of the wheels.

Will 5 Series wheels fit E46?

No, 5 series wheels will not fit. The offset is too small for the width, meaning the wheel will pop out from the sides of your car and will contact your fenders over bumps.

Will E39 wheels fit E46?

E39 wheels have a centerbore of 74.1mm. The E46 has a 72.5mm centerbore. So your E39 wheels will bolt right on, but they won’t be hubcentric. The use of a Tire Rack aluminum adapter ring will cure this problem.

What is wheel fitment?

A wheel’s “fitment” refers to how the wheel will fit within a wheel well or underneath fenders. It’s important to make sure the wheel and tire package you’re purchasing both look good and allows your vehicle to handle properly.

Will E46 M3 wheels fit on an E46?

THEY WILL FIT. I had 8.5×18 wheels with 38mm offset and I rubbed and needed to roll my fenders. To fit M3 wheels you’d need to run narrow tires and seriously roll your fenders.

Will e34 wheels fit E46?

They won’t fit…as you said the wheels will stick out past your fenders and that’s not good. The other thing is…the lowest size you can go on E46s is 16″ necessary for brake clearance. 15″ wheels are too small for your E46.

What is the PCD of BMW E46?

BMW – 3 Serie E46 4 equal rims (1998 – 2005)

PCD: 5×120
Center bore: 72.5
Offset: 47
Mounting: Bolt – 12 x 1,50
Wheel torque steel: 120 Nm / 89 ft-lb