What does LC DCP stand for?

LC-DCP

Acronym	Definition
LC-DCP	Limited Contact Dynamic Compression Plate (orthopedics; also seen as LCDCP)

Can I have an MRI if I have a plate and screws in my ankle?

Since MRI uses a very strong magnet, metal on or inside the body may be affected, so be sure to tell your scheduler and technologist about any device, metal, or shrapnel in your body and they will determine if it is safe for you to proceed with the MRI exam.

What is DCP in surgery?

A dynamic compression plate (DCP) is a metallic plate used in orthopedics for internal fixation of bone, typically after fractures. As the name implies, it is designed to exert dynamic pressure between the bone fragments to be transfixed.

Is it safe to have an MRI with metal implants?

In most cases, an MRI exam is safe for patients with metal implants, except for a few types. People with the following implants may not be scanned and should not enter the MRI scanning area without first being evaluated for safety: some cochlear (ear) implants. some types of clips used for brain aneurysms.

What is LCP in Ortho?

The Synthes Locking Compression Plate (LCP) is part of a stainless steel and titanium plate and screw system that merges locking screw technology with conventional plating techniques. plating with conventional cortex or cancellous bone screws.

What is a locking plate?

Locking plates are fracture fixation devices with threaded screw holes, which allow screws to thread to the plate and function as a fixed-angle device 1 – 3. These plates may have a mixture of holes that allow placement of both locking and traditional nonlocking screws (so-called combi plates) 4 , 5.

Is MRI safe with stents?

All current stents are MRI safe and MRI can be done anytime.

Can I get an MRI with a titanium plate?

Titanium Does Not Interfere With MRIs Titanium is the most common metal used for dental implants, and it is completely non-reactive to magnetism. Because it is not magnetic, it will not interfere with an MRI.

What metal is not allowed in MRI?

Pins, plates and metallic joints Metal that is well secured to the bone, such as hip and knee joint replacements, will not be affected by an MRI. The metal won’t heat up or move in response to the machine. But if the metal is near an organ, such as the prostate, distortion could be a problem.

Can you get an MRI with a copper IUD?

MRI at 3.0-T is possible for women with copper-containing IUDs. However, consulting a gynecologist to check the correct position of the IUD and exclude complications after an MR examination is highly recommended. High-quality clinical imaging of the female pelvis can be performed without a loss in image quality.

What is Combi hole?

The Locking Compression Plates have combination locking and compression (Combi™) holes. The Combi holes allow placement of conventional cortex and cancellous bone screws on one side or threaded conical locking screws on the opposite side of each hole.

What is a neutralization plate?

A neutralisation plate removes the loading forces across a fracture by transmitting the loading forces through the plate rather than through the fracture site. This allows the primary fracture fixation to be accomplished with other devices such as lag screws.

What is a DCP plate used for in orthopedics?

Dynamic compression plate A dynamic compression plate (DCP) is a metallic plate used in orthopedics for internal fixation of bone, typically after fractures. As the name implies, it is designed to exert dynamic pressure between the bone fragments to be transfixed.

What is a dynamic compression plate (DCP)?

What is the LCP plate size for distal radius?

2.4 mm Variable Angle LCP Volar Extra-Articular Distal Radius System The 2.4 mm Variable Angle LCP Volar Extra-Articular Distal Radius Plates are indicated for fixation of intra and extra-articular fractures and osteotomies of the distal radius. No contraindication specific to these devices. 2.4/2.7 mm Locking Tarsal Plates