What does Ennis-Flint make?
pavement marking
Ennis-Flint Inc. is a worldwide leader in the traffic safety, access, rail and road marking industries, providing the most comprehensive lineup of pavement marking materials and electronic control products.
What does Ennis-Flint do?
Ennis-Flint is a worldwide leader in the traffic safety, access, rail, and road marking industries providing the most comprehensive lineup of pavement marking materials and electronic control products.
Who owns Ennis Flint?
PPG Industries
Ennis Traffic Safety Solutions/Parent organizations
International coatings giant PPG Industries (NYSE: PPG) has announced it will acquire High Point-based Ennis-Flint, a maker of pavement marking products, including paint, thermoplastics and other advanced traffic technologies.
How do you use preformed thermoplastic?
Hold the torch nozzle 8-10 inches above the pavement. Using the torch in a circular motion, preheat the surface to a minimum temperature of 275°F. Extend the heating 3-6 inches outside of the premarked area. Do not attempt to preheat an area larger than 4′ x 4′ at any time.
Who owns Ennis Paint?
Ennis Traffic Safety Solutions/Parent organizations
How is thermoplastic paint applied?
Thermoplastic road marking paint, also called hot melt marking paint, is a kind of powder paint. When applied as road surface markings, a hot melt kettle is used to heat it to 200 °C (392 °F) to melt the powder, after which it is sprayed on the road surface. The coating then becomes a hard, polymer line after cooling.
What is cold applied plastic?
Cold applied plastics provide a road marking life of up to 5 years in high traffic areas. Cold applied plastics with glass beads offer good reflectivity and day and night visibility. The product is used on roads and dual use paths as a high skid resistance pavement marking. …
Who bought Ennis-Flint?
PPG
PITTSBURGH–(BUSINESS WIRE)– PPG (NYSE:PPG) today announced that it has completed its acquisition of Ennis-Flint.
Who owns Ennis-Flint?
How long does thermoplastic take to dry?
When applied, thermoplastics cure through the release of heat and return once again to solid form. Thermoplastics must be applied at temperatures of 50 F and rising, plus no moisture for 24 hours, which decreases the application window.
Can you paint over thermoplastic paint?
A paint roller provides quicker coverage than a brush. You can give thermoplastic polyolefin surfaces a facelift with a coat of paint but you’ll need the right kind of paint. Certain paints can react with this polymer coating, causing paint discoloration and lessening the weather resistance.
How thick is thermoplastic?
The specified alkyd or hydrocarbon thermoplastic thickness may vary from 30 to 125 mils. The service life of a thermoplastic marking is directly related to its thickness. A thin line will wear out much faster than a thicker line.