What are the flags in Pentium processor?
The FLAGS register is useful in executing 8086 processor code. The EFLAGS register consists of 6 status flags, 1 control flag, and 10 system flags, as shown in Figure 7.4. Bits of this register can be set (1) or cleared (0). The Pentium provides instructions to set and clear some flags.
What is flag register with example?
The flag register is one of the special purpose register. The flag bits are changed to 0 or 1 depending upon the value of result after arithmetic or logical operations….Status Flags.
|O||The overflow flag is set to 1 when the result of a signed operation is too large to fit.|
How many registers are there in Pentium?
The six segment registers are: CS: code segment register. SS: stack segment register. DS, ES, FS, GS: data segment registers.
What is flag register in microprocessor?
The FLAGS register is the status register that contains the current state of a CPU. The size and meanings of the flag bits are architecture dependent. The adjust flag used to be called auxiliary carry bit in 8080 and half-carry bit in the Zilog Z80 architecture. In i386 architecture the register is 16 bits wide.
What does the carry flag do?
The carry flag enables numbers larger than a single ALU width to be added/subtracted by carrying (adding) a binary digit from a partial addition/subtraction to the least significant bit position of a more significant word.
What are special Pentium registers?
Special-purpose Registers. The special-purpose registers include EIP, ESP, EFLAGS; and the segment registers CS, DS, ES, SS, FS, and GS. EIP addresses the next instruction in a section of memory defined as a code segment.
What is the need of flag register?
The Flag register is a Special Purpose Register. Depending upon the value of result after any arithmetic and logical operation the flag bits become set (1) or reset (0). In 8085 microprocessor, flag register consists of 8 bits and only 5 of them are useful.
How is flag register calculated?
Starts here7:58Flag Register – YouTubeYouTube
How many flags are there in flag register?
6 flag registers
(a) Status Flags – There are 6 flag registers in 8086 microprocessor which become set(1) or reset(0) depending upon condition after either 8-bit or 16-bit operation.
What are the different flags in a register?
|S / N||Sign flag Negative flag|
|V / O / W||Overflow flag|
What is the difference between overflow and carry flag?
Overflow flags get set when the register cannot properly represent the result as a signed value (you overflowed into the sign bit). Carry flags are set when the register cannot properly represent the result as an unsigned value (no sign bit required).
What are E flags in Pentium?
Pentium Registers (Eflags) • Flags never change for any data transfer or program control operation. • Some of the flags are also used to control features found in the microprocessor. 9. • Flag bits, with a brief description of function.
What is the difference between a Pentium 3 and Core 2 Duo?
There were simply 2 Pentium 3 processors on single chip in Core 2 Duo. With advancement of processor technology by making it faster and better, company decided to differentiate it from their first generation processor by naming them as Core 2 Duo where this 2 refers to 2nd generation of processors. 01. It comes under Multi core processor.
What is a dual core processor?
A dual-core processor is type of Central Processing Unit (CPU) that has 2 complete execution cores. Dual core has become similar with Intel Pentium Dual Core, where the Core 2 DUO are series of dual-core processors invented by Intel. 1. Dual-core Processor : Computers were originally launched to be able to solve mathematical problems.
What are the features of the Intel Pentium processor?
Pentium processor 1 Pentium Processor 2 Features of Pentium • Introduced in 1993 with clock frequency ranging from 60 to 66 MHz • The primary changes in Pentium Processor were: – Superscalar Architecture – Dynamic 3 Pentium Architecture