Malachi Head

Is a Bell 9400 a PVR?

Is a Bell 9400 a PVR?

The Bell 9400 HD PVR Plus serve’s up your television entertainment your way! Record your favourite shows from anywhere, see what’s on 9 days in advance, and access stunning On-Demand 1080p HD movies on your HDTV.

How do I connect my bell 9400 to my TV?

9400 – HD PVR Receiver

  1. Turn on your TV and your HD PVR receiver.
  2. Plug the Wi-Fi adapter into the USB extension cradle (included).
  3. Plug the USB extension cradle into a USB port on your HD PVR receiver and make sure the LED light on the adapter turns on.
  4. Once connected, a pop up will appear on your TV screen.

Does Bell 9400 have wifi?

9241 or 9400 PVR These PVRs do not have integrated Wi-Fi. You can purchase a TV Wi-Fi adapter (if one wasn’t provided) to connect your PVR to your home’s Wi-Fi network.

How do I setup my Bell Satellite 9400 receiver?

9400 – HD PVR Receiver

  1. Connect the Wi-Fi adapter to a USB port on the front or back panel of your receiver.
  2. Select Setup.
  3. Choose your home Wi-Fi network and select Done.
  4. Enter your Wi-Fi password (or encryption key) and select Done.
  5. Your receiver will test the Wi-Fi connection.
  6. The Wi-Fi signal strength is displayed.

How do I record on Bell PVR 9400?

Models 9241, 9242, 9400, 9500

  1. Press the RECORD button on your remote control while watching the program you wish to record.
  2. After you have started recording your program, simply press the up or down arrows on your remote to change channels, or choose another program from the guide.

How do I install my bell 9241 receiver?

How to set up your replacement receiver

  1. 9241 – HD PVR Plus Receiver.
  2. Disconnect your old receiver and connect the replacement using the same cables.
  3. Turn your receiver and TV on.
  4. Wait about 2 to 4 minutes until the Point Dish screen is displayed.
  5. Select Check Switch with your Bell TV remote.
  6. Select Test.

How do I reset my bell 9400 receiver?

9400 – HD PVR Receiver

  1. If you can’t see any picture on your TV, reset your receiver by pressing and holding the POWER button for 5 seconds.
  2. On your Satellite TV remote, press MENU.
  3. Scroll to and select System Setup.
  4. Scroll to and select Factory Defaults.
  5. Read the warning and select Yes.

Where is the power button on Bell 9400 receiver?

Power button Located on top of the receiver.

Does a 9241 receiver need a smart card?

You do not need a smart card.

How do I change the time on my Bell 9400 receiver?

Press Menu on your remote control (on 9400 models or older) or Menu followed by Settings (9500, 7500) and select Preferences. Select Updates. Choose a time that is more convenient. Select Done.

How do I set the time on my Bell 9400?

How to schedule the time when your receiver gets its updates

  1. Press Menu on your remote control (on 9400 models or older) or Menu followed by Settings (9500, 7500) and select Preferences.
  2. Select Updates.
  3. Choose a time that is more convenient.
  4. Select Done.