How much horsepower does a Detroit 60 series engine have?
Detroit 60 Series Engine Specs
| 11.1L Detroit 60 Series | 12.7L Detroit 60 Series | |
|---|---|---|
| Rated Horsepower: | 250 – 350 hp @ 1,800 RPM | 380 – 455 hp @ 1,800 RPM |
| Rated Torque: | 1,100 – 1,250 lb-ft @ 1,200 RPM | 1,350 – 1,550 lb-ft @ 1,200 RPM |
| Max Engine Speed: | 2,100 RPM (some continuous duty applications may be governed at 1,800 RPM) |
How much does a Detroit 60 series engine weight?
The Series 60 engine displacement is 3.7 gallons and refers to how much fluid the pistons can move from the top dead center to the bottom dead center of the cylinders. This is an inline 6-cylinder engine, and it weights 2,840 lbs.
How much oil does a 60 series Detroit hold?
Install both engine oil filters. Fill the engine with 40 quarts of fresh engine oil (the oil that was pre filled into the oil filters is included in this amount) Reinstall engine oil cap.
How do I Prep my Detroit Series 60 for an overhaul?
In order to start any major overhaul, the following steps need to be taken to properly prep your Detroit Series 60. Step one- Disconnect the battery cables. Step two- Remove the drain plug and open the drain cocks in the oil cooler, cylinder block, thermostat housing and Detroit Series 60 water pump to drain all of the coolant.
What are the dimensions of a Detroit Diesel Series 60 engine?
Detroit Diesel Series 60 Dimensions approx 11.1 liter length: 56.6 in, 1437 mm width: 37.3 in, 947 mm height: 49.6 in, 1259 mm 12.7 liter length: 56.2 in, 1426 mm width: 37.5 in, 953 mm height: 49.6 in, 1259 mm 14.0 liter length: 56.2 in, 1426 mm width: 37.5 in, 953 mm height: 49.6 in, 1259 mm Click for Detroit Diesel Series 60 engine…
How do you drain the oil from a Detroit Series 60?
Step two- Remove the drain plug and open the drain cocks in the oil cooler, cylinder block, thermostat housing and Detroit Series 60 water pump to drain all of the coolant. Step three- Drain the lubricating oil. Step four- Disconnect the fuel line from the fuel filter and cylinder head.
How often do Detroit Diesel engines need to be overhauled?
Detroit Diesel prescribed overhaul intervals of 500,000 miles (800,000 km), then raised that to 750,000 miles (1,210,000 km) after more experience was gained with the new engine. In 1993, the 11.1 L (677 cu in) version was rated at 350 bhp (261 kW) (but would produce 15 more if the cruise control was engaged).