How many joules should an electric fence have for cattle?
Gerrish recommends 1 joule of output per mile of fence, regardless of how many strands of wire. If there’s a total of six miles of fence, it requires a minimum of a 6-joule energizer.
Why is electric high tensile fence better suited for cattle than sheep?
High-tensile electric fences last for a long time, are relatively easy to construct, and cost less than other types of fencing. Whereas cattle can often be controlled with 1 or 2 strands of electric wire, sheep require multiple strands, not so much to keep them in, but to keep potential predators out.
Is electric fence wire high tensile?
Electrified high tensile fencing is a permanent fencing solution and is a better choice when compared to barbed wire, woven wire and other permanent, non-electrified barrier fences. Electrified high tensile fencing is the best way to contain or keep out animals.
Will an electric fence keep cattle in?
The electric fence sends only a small, electric pulse designed to deter the animal from wondering to close. After a while, it creates a psychological barrier in the cattle’s brain, keeping them within the confines of the fence. Other options in fencing may hurt the livestock if they get close enough.
Can you have too many joules?
Clamping voltage is the amount of voltage it takes to gets the surge protection to kick in. The lower the voltage, the better the protection. It doesn’t matter how many joules your surge protector has. You shouldn’t buy anything with a higher voltage than this.
What type of fence is best for cattle?
High-tensile, woven-wire steel mesh with a “fixed knot” design is the foundation for the best fencing for cattle. If you don’t want to worry about maintenance, this steel mesh, fixed-knot fencing is the best place to start.
How far apart should posts be for electric fence?
Although it’s really up to you, the commonly accepted distance between posts is 12 feet. However, others recommend anywhere between 15 feet and 30 feet.
How do you build a high tensile electric fence for cattle?
Building High-Tensile Fence
- Dig holes for the corner posts.
- Set corner posts.
- Build braces.
- Attach insulator tubes to corner post.
- Unroll the wire.
- Lay out line posts.
- Attach the insulator tubes and wire on the second corner, before you walk (or drive) back to the first corner.
- Cut and attach wire on the first corner.
Does high tensile wire rust?
aluminum wire for electric fences. It has several advantages including a lifetime guarantee against rust, maximum conductivity for carrying power over long distances and is ideal for long leadoffs with very high powered energizers. …
How tall should a cattle fence be?
Fence height should be at least 48 inches high to prevent animals from climbing over the fence. Woven wire fence can be used with cattle provided there are several strands of barbed top wires used to prevent the cattle from rubbing the woven wire down.