How do you change the time on a citizen chronograph watch?

How do you change the time on a citizen chronograph watch?

1) Pull the crown out two steps to the time setting position [2]. 2) Rotate the crown clockwise until you see the date change. Use this as a midnight reference position. Continue turning the crown to set the current time.

How does a citizen chronograph work?

Using the Chronograph The chronograph second and minute hands are placed at 12 o’clock position before the measurement starts. After the chronograph displays elapsed time for 59 minutes 59 seconds, it resumes timing from 0 seconds.

How do you set a Citizen Watch?

Wait until the second hand is at zero (the top of the dial). Then pull the crown knob out as far as it will go to set the time on your watch. Turn the knob in either direction and look at the three additional hands on the time dials of your watch: the minute hand, the hour hand and the 24-hour hand.

How to set Citizen Eco Drive watch?

How do you set the time on a Citizen Eco Drive radio controlled? Pull out the crown and press and hold the button closest to the 4 0’clock position for 2-3 seconds. Once you hear the tone, the watch is in manual receiving mode, place it face up by a south facing window with the 6 o’clock position pointing out of the window.

How to set citizen Blue Angel Watch?

Setting a Citizen Skyhawk Blue Angel watch takes only a few steps. Take the watch off of the user’s wrist and point the 9:00 position of the watch towards a window. The Blue Angel watch is an atomic watch, which means it automatically receives a time signal from atomic time clocks throughout the world, including the U.S. and Japan.

How do you change the date on a Citizen Watch?

Turn it counterclockwise until you notice the date on the watch changing. Stop it and push the knob back in to its starting position once you reach the correct one. Try to set the date before 9 p.m. If you set it after that time, it may not register with your watch that it should switch the date at midnight.