How do I pair my Sony Bluetooth headset with SBH20?

How do I pair my Sony Bluetooth headset with SBH20?

Headset: Press and hold until the notification light flashes blue. Phone: Scan for Bluetooth™ devices, then select Stereo Bluetooth™ Headset SBH20 in the available devices list. Follow the pairing instructions that appear on your phone. If a passcode is required, enter 0000.

How do I use Sony SBH20?

1 Make sure that your phone has the NFC function turned on and that the phone screen is active. 2 Turn on the headset. 3 Place your phone over the headset so that the NFC detection area of each device touches the other. 4 Follow the pairing instructions that appear on your phone.

How do I pair my Sony sbh24?

1 Make sure that your headset is fully charged and turned on. 2 On the Android device, make sure that NFC is turned on and the screen is unlocked. 3 Touch the NFC area of your headset against the NFC detection area of the Android device. 4 Follow the on-screen instructions on the Android device to complete the pairing.

How do I reset my Sony Bluetooth headphones?

Initialise the Headphones to Factory Settings

1. Turn off the headset, and ensure no USB cable is connected.
2. Press and hold the power button and the NC/Ambient button for 7 seconds or more.
3. The headset will initialise, resetting the settings and pairing information.

How do you use a Bluetooth stereo headset?

Tap the headphones listed. On an Android device, pull down the shade from the top of the phone and long-press the Bluetooth icon. It’ll bring you right to the Bluetooth menu where you can turn it on and then search for devices. Tap the name of the headphones you’re trying to pair.

How do I reset my headphones to factory settings?

Turn off the headset, then press and hold the POWER and / buttons simultaneously for more than 7 seconds. The indicator (blue) flashes 4 times, and the headset is reset to the factory settings. All pairing information is deleted.

How do I put my headset in stereo mode?

The configuration is changed through Control Panel.

1. Click on the “Start” menu and select “Control Panel.”
2. Double-click on the “Sound” icon to bring up its dialog box.
3. Select your headphones.
4. Put on your headphones, and click the “L” and “R” speaker icons.
5. Click “OK” to save the changes.

How do I turn on Bluetooth on my stereo?

Open Devices and Printers by clicking the Start button, and then, on the Start menu, clicking Devices and Printers. 2. Right-click the Bluetooth enabled device you want to change, and then click Properties. If the device is connected properly, it should appear in the Devices and Printers folder.

How do I connect my Sony Bluetooth radio to my phone?

To pair the car audio and your phone, see the following procedure:

1. Make sure Bluetooth is activated on the device you wish to pair with the car audio.
2. Select the Bluetooth source (Phone).
3. Go to Bluetooth Menu.
4. In the Bluetooth settings menu, press Pairing.