How do I configure a L2TP VPN?

How do I configure a L2TP VPN?

Navigate to the Settings > VPN > VPN Servers > Create New VPN Server > Create section to add the L2TP server.

  • Select Create Basic VPN and enter the following settings: Step 1 of 3 – Basic VPN Enter VPN Name: l2tp Gateway IP/Subnet: 192.168.2.1/24 Step 2 of 3
  • Apply the changes.
  • How to setup L2TP VPN on Windows 10?

    From the Windows 10 Start Menu,click Settings.

  • Click Network&Internet.
  • On the left navigation menu,select VPN.
  • Click Add a VPN connection.
  • In the VPN provider text box,select Windows (built-in).
  • In the Connection name text box,type a name for the Mobile VPN (such as “L2TP VPN”)
  • In the Server name or address text box,type the DNS name or IP address for the Firebox external interface.
  • From the VPN Type drop-down list,select Layer 2 Tunneling Protocol with IPSec (L2TP/IPSec).
  • Click Save. The VPN is added to the Network&Internet VPN settings page.
  • On the VPN settings page,click Change adapter options.
  • Click your VPN to select it.
  • Click Change settings of this connection. The Properties for this VPN appear.
  • Click the Security tab.
  • From the Data encryption drop-down list,select Require encryption (disconnect if server declines).
  • Select Allow these protocols.
  • Select Microsoft CHAP Version 2 as the only allowed protocol.
  • Click Advanced settings. The Advanced Properties dialog box appears.
  • If Mobile VPN with L2TP on the Firebox is configured to use a pre-shared key as the IPSec credential method: Select Use pre-shared key for authentication.
  • If Mobile VPN with L2TP on the Firebox is configured to use a certificate as the IPSec credential method: Select Use certificate for authentication.
  • Click OK.
  • Do not change the default settings on the Networking tab.
  • Click OK.
  • How do I set up a VPN in Linux?

    Open Linux “ Network Manager ” and access “Network Connection” Click on the “VPN” tab and hit “Import” but don’t click on “Add”. Select the Linux VPN server file from downloaded configuration files. There will be a set of configuration fields visible to edit your Linux VPN connection.

    How to set up L2TP VPN in Cyberoam?

    Configure L2TP Go to VPN > L2TP > Configuration and click Enable L2TP. Specify the parameters as given below.

  • Add L2TP Members Click Add Member (s) to add the users who would connect to Cyberoam using L2TP. Select the L2TP members.
  • Create L2TP Connection Go to VPN > L2TP > Connection and click Add to add an L2TP connection as per parameters below.