What fluid goes in a NP241 transfer case?

What fluid goes in a NP241 transfer case?

Dexron III

JEEP TRANSFER CASES
Transfer Case Model Fluid Type
NP241 ATF (Dexron III or higher)
NP241-OR ATF (Dexron III or higher)
NP242 ATF (Dexron III or higher)

What kind of fluid does my transfer case take?

automatic transmission fluid
Transfer cases may be filled with gear oil, automatic transmission fluid (ATF), or specialty lubricants. It is important to regularly inspect the transfer case for any damage, leaks, or other concerns.

What fluid goes in a Ram 2500 transfer case?

Differential gear oil and transfer case fluid specification capacity notes: The 2014-2018 Ram 2500 recommends the use of SAE 75W85 API GL-5 gear oil in both front and rear differentials.

How much fluid does a NV4500 hold?

New Venture NV4500 Transmission Specs

Transmission: New Venture NV4500
Case Length: 12.375″
Max Input Torque: 460 lb-ft
Weight: ~ 195 lbs dry
Oil Capacity: ~ 4 quarts (1 gallon), fill to bottom of fill plug hole

How many quarts are in a np241?

It’ll live with 2 qts.

How do you check the transmission fluid on a Dodge Ram diesel?

Simply follow these steps:

  1. Make sure your car is in park before getting out and opening the hood.
  2. Find the transmission fluid dipstick.
  3. Remove the dipstick and touch the fluid, moving it around between your thumb and forefinger.
  4. Wipe off the dipstick, then insert it back into the vehicle.

What kind of fluid goes in a NV4500?

NV4500 Transmission Fluid Spec The NV4500 manual transmission is highly sensitive to its fluid type as it uses special carbon fiber synchronizers. The original fluid spec is Castrol Syntorq synthetic 75W-90 GL-4 manual transmission fluid.

What gear oil goes in NV4500?

Special Synthetic gear oil is required for proper operation and lifespan of the carbon composite gear synchronizers. These are the only lubricants recommended by New Venture Gear for the NV4500: 75W-90 Castrol Syntorque Synthetic.