Navigate to the Settings > VPN > VPN Servers > Create New VPN Server > Create section to add the L2TP server.
Select Create Basic VPN and enter the following settings: Step 1 of 3 – Basic VPN Enter VPN Name: l2tp Gateway IP/Subnet: 192.168.2.1/24 Step 2 of 3
Apply the changes.
How to setup L2TP VPN on Windows 10?
From the Windows 10 Start Menu,click Settings.
Click Network&Internet.
On the left navigation menu,select VPN.
Click Add a VPN connection.
In the VPN provider text box,select Windows (built-in).
In the Connection name text box,type a name for the Mobile VPN (such as “L2TP VPN”)
In the Server name or address text box,type the DNS name or IP address for the Firebox external interface.
From the VPN Type drop-down list,select Layer 2 Tunneling Protocol with IPSec (L2TP/IPSec).
Click Save. The VPN is added to the Network&Internet VPN settings page.
On the VPN settings page,click Change adapter options.
Click your VPN to select it.
Click Change settings of this connection. The Properties for this VPN appear.
Click the Security tab.
From the Data encryption drop-down list,select Require encryption (disconnect if server declines).
Select Allow these protocols.
Select Microsoft CHAP Version 2 as the only allowed protocol.
Click Advanced settings. The Advanced Properties dialog box appears.
If Mobile VPN with L2TP on the Firebox is configured to use a pre-shared key as the IPSec credential method: Select Use pre-shared key for authentication.
If Mobile VPN with L2TP on the Firebox is configured to use a certificate as the IPSec credential method: Select Use certificate for authentication.
Click OK.
Do not change the default settings on the Networking tab.
Click OK.
How do I set up a VPN in Linux?
Open Linux “ Network Manager ” and access “Network Connection” Click on the “VPN” tab and hit “Import” but don’t click on “Add”. Select the Linux VPN server file from downloaded configuration files. There will be a set of configuration fields visible to edit your Linux VPN connection.
How to set up L2TP VPN in Cyberoam?
Configure L2TP Go to VPN > L2TP > Configuration and click Enable L2TP. Specify the parameters as given below.
Add L2TP Members Click Add Member (s) to add the users who would connect to Cyberoam using L2TP. Select the L2TP members.
Create L2TP Connection Go to VPN > L2TP > Connection and click Add to add an L2TP connection as per parameters below.